Expert solutions for your lifting needs
Standard Features of Tecmach Scissor Lift tables
Robust scissor mechanisms exceeding minimum specification.
The scissor lift tables are manufactured according to EU Machinery directive and meet the requirements BS EN 1570 and carry the CE mark.
Over specified bronze bearings with ground steel pins have plenty of surplus capacity for long life.
Hydraulic cylinders have built-in bottom end cushioning and a hose rupture valve is fitted in each cylinder.
The units are designed to be used in an industrial environment and have a minimum maintenance and inspection requirements.
All pins are fixed in position to eliminate the risk of the pin working out.
Scissor lift Safety Features
A safety trip ledge is fitted around the lower edge of the platform. This will stop the lift in the event of an object coming into contact with it. The frame is of a light yet robust construction and extends to the extremes of the platform, eliminating the risks of entrapment. When the frame has been operated the UP button has to be pressed to reset the trip circuit.
Each cylinder has a hose rupture valve are fitted in the cylinder port to prevent the lift dropping in an uncontrolled in the event of hydraulic pressure loss.
If the table is subject to overloading a by-pass valve is opened and the oil is returned to tank.
The inner and outer scissors are spaced 30 mm apart to avoid trap points.
Robust scissor mechanisms exceeding minimum specification.
The scissor lift tables are manufactured according to EU Machinery directive and meet the requirements BS EN 1570 and carry the CE mark.
Over specified bronze bearings with ground steel pins have plenty of surplus capacity for long life.
Hydraulic cylinders have built-
The units are designed to be used in an industrial environment and have a minimum maintenance and inspection requirements.
All pins are fixed in position to eliminate the risk of the pin working out.
Scissor lift Safety Features
A safety trip ledge is fitted around the lower edge of the platform. This will stop the lift in the event of an object coming into contact with it. The frame is of a light yet robust construction and extends to the extremes of the platform, eliminating the risks of entrapment. When the frame has been operated the UP button has to be pressed to reset the trip circuit.
Each cylinder has a hose rupture valve are fitted in the cylinder port to prevent the lift dropping in an uncontrolled in the event of hydraulic pressure loss.
If the table is subject to overloading a by-
The inner and outer scissors are spaced 30 mm apart to avoid trap points.