Standard Features of Tecmach Scissor Lift tables


Robust scissor mechanisms exceeding minimum specification.


The scissor lift tables are manufactured according to EU Machinery directive and meet the requirements BS EN 1570 and carry the CE mark.


Over specified bronze bearings with ground steel pins have plenty of surplus capacity for long life.


Hydraulic cylinders have built-in bottom end cushioning and a hose rupture valve is fitted in each cylinder.


The units are designed to be used in an industrial environment and have a minimum maintenance and inspection requirements.


All pins are fixed in position to eliminate the risk of the pin working out.


Scissor lift Safety Features


A safety trip ledge is fitted around the lower edge of the platform.  This will stop the lift in the event of an object coming into contact with it.  The frame is of a light yet robust construction and extends to the extremes of the platform, eliminating the risks of entrapment. When the frame has been operated the UP button has to be pressed to reset the trip circuit.


Each cylinder has a hose rupture valve are fitted in the cylinder port to prevent the lift dropping in an uncontrolled in the event of hydraulic pressure loss.


If the table is subject to overloading a by-pass valve is opened and the oil is returned to tank.


The inner and outer scissors are spaced 30 mm apart to avoid trap points.

Tecmach Home | Products | Applications | Contact Us | © Tecmach Ltd 2016 TECMACH LTD        t: 02392 525613     f: 01727 844062                 e: sales@tecmach.co.uk

Scissor lift range

Single Scissor lift

Double scissor lift

Tandem scissor lift table

Low Profile scissor lift table

Mobile Scissor lifts / trolleys

Welding bench

Car lift

Custom scissor lifts


Bin and Refuse lift

Mast lift


Pedestrian Stackers




Safety Mesh Curtains

Roller blinds

Safety signs

Curly / spiral cable

Examples of:

Applications and uses

More Applications



Member of FSB